Hardening time
Do not move the vehicle before the adhesive has hardened .
Check the degree of hardness of the adhesive with a fingernail.
If the adhesive cannot be pressed in any further with a fingernail, the vehicle may be moved (without engine force) for further processing applications (e.g. painting).
Vehicle strength for driving applications is achieved after:
48 hours at an object temperature of 15°C.
10 hours at an object temperature of 23°C.
1 hour at an object temperature of 60°C.
0.5 hours at an object temperature of 85°C.
IMPORTANT:
When using radiant heaters, make sure that the object temperature does not exceed 85 °C. Excessively high temperatures will destroy the adhesive.