LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2010 >> 760Li >> Repair and Diagnosis >> Collision >> General Collision Information >> COLLISION - BODY PANEL REPAIR (F02) 760Li >> Body Panel Repair General Information >> 41 00... Information On Metal Filler >> Applying filler

Applying filler

Apply pressure to apply a thin layer of metal filler. Carefully coat all edges in gaps with filler.

Then fill gap completely with filler. Apply filler with about 30% excess because the filler will significantly shrink during hardening. A second application of metal filler is not possible due to poor adhesion.

IMPORTANT: Use a narrow spatula to fill the gaps. Apply the filler in one draw if possible. Danger of formation of pores in gaps!

No restrictions related to the layer thickness.

scientia non olet · About LEMON Manuals