65 12 200 Removing and installing (replacing) audio system controller
IMPORTANT:
Read and comply with NOTES ON PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Follow instructions for HANDLING OPTICAL FIBRES .
Follow instructions for HANDLING OPTICAL FIBRES .
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD .
- Remove MIDDLE TRIM FOR INSTRUMENT PANEL .
NOTE:
Work is shown on the E60 by way of example. There may be differences in detail in the case of other car models.
IMPORTANT:
Do not scratch center console trim, cover if necessary.
Release screws (1).
Tightening torque: 2.8 Nm
Pull back audio system controller (2) slightly.
Disconnect associated plug connections.
Remove audio system controller (2).
Replacement:
Carry out PROGRAMMING/CODING .