63 14 080 Removing and installing/replacing front reflector
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Lever front reflector (1) with special tool 00 9 322 in direction of arrow (A) out of front side panel (2) and remove in direction of arrow (B).
Installation:
Locking spring (3) must not be damaged or missing.
Fig 1: Removing Front Reflector With Special Tool 00 9 322 In Direction Of Arrow Out Of Front Side Panel
Installation:
Feed front reflector (1) first in front area into front side panel and then press down in rear area.
Make sure front reflector (1) is correctly engaged on front side panel.