51 34... Removing and installing/replacing trim for window guide of left or right rear door

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Open rear side window
Remove inner WINDOW CAVITY SEAL
Release COVER ON DOOR WINDOW FRAME

Pull out rubber guide (1) at trim (2).

Installation:

Moisten rubber guide (1) with water before fitting.

Fig 1: Identifying Rubber Guide And Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (2).

Remove trim (1) for window guide in direction of arrow.

Fig 2: Removing Window Guide Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Threads (1) of trim (2) must not be damaged.

Fig 3: Identifying Trim And Threads

Courtesy of BMW OF NORTH AMERICA, INC.