34 51 Slip control system (DSC)
WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SLIP CONTROL SYSTEM (DSC)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | E70, E71, E72 | Initial tightening Final tightening | 2 ± 0.5 Nm 4.3+ 0.5 Nm | |
| 2AZ DSC sensor to floor pan | E70, E71, E72 | 8 Nm | ||
| 3AZ Pulse sensor to swivel bearing/wheel carrier | E70, E71, E72 | 8 Nm | ||
| 4AZ Hydraulic control unit to holder | E70, E71, E72 | M8 | 19 Nm | |
| 5AZ Holder, hydraulic control unit, to body | E70, E71, E72 | 8 Nm | ||
| 6AZ ICM control unit to body | E71, E72 | 8 Nm |