65 83 010 Removing and installing/replacing Car Communication Computer
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
NOTE:
Comply with notes and instructions on HANDLING OPTICAL WAVEGUIDES
.
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD
- Remove middle trim for instrument panel. See REMOVING AND INSTALLING (REPLACING) CENTRE INSTRUMENT PANEL TRIM (FROM 03/2007) , REMOVING AND INSTALLING (REPLACING) CENTRE INSTRUMENT PANEL TRIM (UP TO 03/2007) , or REMOVING AND INSTALLING/REPLACING CENTRE (BOTTOM) INSTRUMENT PANEL TRIM .
Release screws (1).
IMPORTANT:
Do not scratch center console trim, cover if necessary.
Pull back Car Communication Computer (2) slightly.
Unlock associated plug connections and disconnect.
Remove Car Communication Computer (2).
Replacement:
Carry out PROGRAMMING/CODING .