65 77 Airbag Triggering Control
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
AIRBAG TRIGGERING CONTROL SPECIFICATIONS TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Airbag control unit to tunnel middle | E70, E71, E82, E88 | - | - | 8 Nm |
| 2AZ Sensor, A-pillar | E70 | - | - | 8 Nm |
| 3AZ Sensor, B-pillar, to B-pillar | E70, E71, E82, E88 | - | - | 8 Nm |
| 4AZ Sensor, front door, to inner door panel | E70, E71, E82, E88 | - | - | 8 Nm |
| 5AZ Sensor, rear seat, to seat frame | E70 | - | - | 8 Nm |
| 6AZ Acceleration sensor to front support carrier | E70, E71, E82, E88 | - | Replace screws | 8 Nm |
| 7AZ Holder, rollover controller to rollover protection | E88 | - | - | 4.5 Nm |
| 8AZ Rollover controller to holder | E88 | - | - | 5 Nm |