11 23 Vibration Damper
VIBRATION DAMPER - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 3AZ Belt pulley / vibration damper to hub | S38 / B36 | M8 10.9 | 34 Nm | |
| N40 / N42 / N45 / N46 / S38 / B38 | M8 10.9 | 34 Nm | ||
| All / others | M8 | 22 Nm | ||
| 4AZ Belt pulley to vibration damper | S38 / B35 | M8 8.8 | 22 Nm | |
| S50 | M8 8.8 | 22 Nm | ||
| 5AZ Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| M42 / M43 / M43TU / M44 | M16 x 1.5 | Replace screw | 330 Nm | |
| 6AZ Hub to crankshaft | N40 / N42 / N45 / N46 |
M16 x 1.5 | Replace screw | 300 Nm |