LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2010 >> 535i Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Tightening Torques >> Crankshaft With Bearing >> 11 21 Crankshaft and Bearings

11 21 Crankshaft and Bearings

CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Increment wheel on crankshaft S54 M5 10.9 Replace screws  
      Jointing torque 5.0 Nm
      Torque angle 45°
Increment wheel on crankshaft   M5 10.9 Replace screws 13 Nm
Increment wheel on crankshaft   M5 8.8 Replace screws 5.5 Nm


CRANKSHAFT AND BEARINGS - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Torsion damper (hub) to crankshaft (central bolt 12.9) N54 M16 x 80 Replace screws
Lightly oil screws and threads		  
      Jointing torque 100 Nm
      Torque angle 360°
scientia non olet · About LEMON Manuals