11 22 500 Removing and installing or replacing flywheel
Special tools required:
Necessary preliminary tasks:
- Remove transmission.
- Remove CLUTCH .
Enlarge special tool 11 9 260 with an elongated hole.
Work out elongated hole on special tool 11 9 260 to 8 mm.
For vehicles with manual transmissions:
Secure flywheel with special tool 11 9 260.
Release flywheel screws with special tool 11 4 180.
Tightening torque: 11 22 1AZ .
Installation note:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
For vehicles with automatic transmissions:
Secure flywheel with special tool 11 9 260.
Release flywheel screws with a suitable tool (1).
Tightening torque: 11 22 1AZ .
Installation note:
Flywheel is secured with a dowel pin.
Fit new flywheel screws.
Assemble engine.