Necessary preliminary tasks

Version with through-loading system:

Specification with pocket holder:

Pull expander rivets (1) out of pocket holder (2) and remove pocket holder (2).

Fig 1: Identifying Expander Rivets And Pocket Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Release clips (1).

Release screw (2) and remove cover (3).

Feed out luggage compartment wheel arch trim (4) in direction of arrow.

Fig 2: Feeding Out Luggage Compartment Wheel Arch Trim In Direction Of Arrow

Courtesy of BMW OF NORTH AMERICA, INC.

Installation in version without through-loading system only:

Installation:

To install luggage compartment wheel arch trim, proceed as follows:

Remove REAR SEAT
Unscrew screws (1).
Press backrest from luggage compartment in direction of vehicle interior and feed luggage compartment wheel arch trim between wheel arch and backrest

Tightening torque 52 24 01AZ .

Fig 3: Identifying Rear Seat Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, release retainers (1) on back of luggage compartment wheel arch trim (2) and remove securing net (3).

Fig 4: Identifying Retainers On Back Of Luggage Compartment Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.