Necessary preliminary tasks

• Remove left/right TRIM PANEL FOR ROOF PILLAR  (C-pillar)
• Remove REAR MID-RANGE SPEAKER on left/right
• Release bottom rear seat belts  . See 7211101 REMOVING AND INSTALLING/REPLACING REAR CENTRE SEAT BELT or 7211092 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT SEAT BELTS

Version with child seat holder: 

• Remove all TOP TETHER EYELETS FOR CHILD SEAT

Version without through-loading system: 

• Remove BACKREST for rear seats

Version with through-loading system: 

• Remove TRIM ON REAR WINDOW SHELF 
• Remove left/right ARMREST SIDE SECTIONS

Version with roller sun blind: 

• If necessary, remove DRAWER  in luggage compartment

Version with roller sun blind: 

Release screws (1).

Tightening torque, see 51 46 3AZ in 51 46 PANEL, REAR PARCEL SHELF, ROLLER SUN BLIND .

Version with roller sun blind: 

Disconnect connector (1).

All versions: 

Remove plate (1).

Pay attention to catches (2).

Remove trim (1) and feed out from belt (3).

Version without through-loading system: 

Release clips (2).

All versions: 

Pull out rear window shelf (1) towards front and feed out belts (4).

Installation: 

Make sure rear window shelf (1) is correctly fed under grid (3)