If replacing version with cable to inside rearview mirror

Mark cutout (1) on roofliner.

1. A= Centre of roofliner
2. B= 14 mm
3. C= 20 mm

   Cut out cutout (1) with scalpel.

   IMPORTANT: Ensure a clean cut so that the headliner material is not damaged on the inside.
   Fig 1: Identifying Roofliner Cutout Dimensions

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Installation sequence:

1. Secure roof liner with mucket
2. Secure roofliner in middle to Velcro-type fastener
3. Snap roofliner at rear onto clips
4. Insert expander rivets at front
5. Screw down grab handles at front on left/right
6. Screw down grab handles at rear on left/right
7. Screw down sun visors and counter supports
8. Add final details to vehicle