5121180 Removing and installing/replacing cover on outside door handle

Lever out cap (1) and release screw underneath.

Installation:

If necessary, replace faulty trim (1).

Fig 1: Identifying Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover (1) in direction of arrow with outside door handle (2) opened slightly.

Fig 2: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version with light package:

Installation:

Make sure outside door handle light (1) is correctly positioned in area (2).

Guides (3) of outside door handle light (1) must be correctly seated in carrier for outside door handle (4).

Fig 3: Identifying Guides Of Outside Door Handle Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) must not be damaged.

Fig 4: Identifying Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

NOTE: Similar to graphic.

Detach cover (2) from filler piece (3).

Installation:

Catches (1) of cover (2) must not be damaged.

Fig 5: Removing Cover From Filler Piece

Courtesy of BMW OF NORTH AMERICA, INC.