3200... Moving vehicle into normal position

Necessary preliminary tasks 

• Check compliance with TEST CONDITIONS  , bring vehicle to a stop if necessary.
• Version with air spring system: Carry out ride-height calibration
• Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
• Introduce DIN load (refer to CHASSIS/WHEEL ALIGNMENT - NORMAL POSITION E90, E91/LCI
• Determine vehicle ride height. See 3133095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLE
  NOTE: If the vehicle ride height is not inside the tolerance (refer to Technical Data  See REAR AXLE - RIDE HEIGHT E90 or FRONT AXLE - RIDE HEIGHT ), the vehicle must be repaired (coil spring/leakage).