33 21 Output Shaft
TIGHTENING TORQUE SPECIFICATION - OUTPUT SHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft to rear axle final drive drive flange (Torx screw with RIBBED TEETH ) |
E81/E82/E87/E90/E91/E92/E93 | M8 | Replace screws | 52 Nm |
| E81/E82/E84/E87/E88/E90/E91/E92/E93 | M10 ZNS3 | Replace screws | 70 Nm | ||
| E87 | M10 ZNS | Replace screws | 80 Nm | ||
| E90/E92/E93/S65 | M12 | Replace screws | 120 Nm | ||