31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabiliser to front axle carrier/steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 105 ° | ||||
| F03 | M12 | Replace screw. | |||
| Jointing torque | 100 Nm | ||||
| F03 | M14 | Replace screw. | |||
| Jointing torque | 165 Nm | ||||
| F25/F26 | M10 | 56 Nm | |||
| 2AZ | Stabiliser link to stabiliser/damper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45° | ||||
| 3AZ | Anti-roll bar link to anti-roll bar | F25/F26 | M12 | Replace nut. | 100 Nm |
| 4AZ | Anti-roll bar link to damper | F25/F26 | M12 | Replace nut. | 108 Nm |