12 52 Plug connections, terminals, loose parts
TIGHTENING TORQUE SPECIFICATION - PLUG CONNECTIONS, TERMINALS, LOOSE PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52/N52K/N54 | M6x12 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52/N52K/N53/N54 | M6 | Replace screws Jointing torque Torque angle |
3 Nm 45 ° |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52/N54/N52K/N51/N53 | M8 | Replace screws Jointing torque Torque angle |
8 Nm 45 ° |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |