LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 970 (Tire Pressure Monitor Systems) >> Description & Operation >> Tire Pressure Monitor (TPM) System

Tire Pressure Monitor (TPM) System

WARNING: This page does not describe the selected car, but rather 37 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2010 BMW 650i, 2010 BMW 550i, and 2010 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If a tire pressure has been adjusted, or a wheel or tire has been replaced, the TPM or FTM system must be reinitialized. See appropriate tire pressure monitor system under RESET PROCEDURES .
NOTE: 5-Series and 6-Series models are equipped with one of either of the two types of tire pressure monitor systems:
  • The Flat Tire Monitor (FTM) system  , which uses the ABS system to measure each tire's rolling radius changes and with it, the rotational speed of the wheels. Changes are detected and signaled as a flat tire. The Flat Tire Monitor (FTM) system does not use tire pressure sensors installed in the tires.
  • The Tire Pressure Monitor (TPM) system  , uses tire pressure sensors installed in the tires to check the tire inflation pressure in the four mounted tires. The system indicates if the tire inflation pressure has dropped considerably in one or several tires.