LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Power Rack & Pinion - E36) >> Removal & Installation >> Power Steering Cooling Loop (Z3) >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 61 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Draw hydraulic fluid out of tank and do not re-use.
  2. Remove cover on radiator at bottom. Release both hose clamps on cooling loop and detach hoses. Remove cooling loop from front panel. See Fig 1.
  3. To install, reverse removal procedure. Bleed power steering system. See BLEEDING POWER STEERING SYSTEM .
Fig 1: Removing Cooling Loop
G00177876Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals