LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Air Bag Restraint Systems) >> Removal & Installation >> Safety & Information Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 BMW 745i and 2002 BMW 745Li. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
  2. Remove 4 screws and lower instrument panel bottom right trim panel. Disconnect footwell light and remove trim panel. Pull module catch down and unlock. Slightly pull safety and information module from carrier. See Figure . Disconnect harness connectors and remove module.
  3. To install, reverse removal procedure. Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals