LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 661 (Brakes - Special Tools) >> Brakes >> 34 1 130 Installation sleeves >> Minimum Set: Mechanical Tools

Minimum Set: Mechanical Tools

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2007 BMW 550i, 2007 BMW 530i, 2006 BMW 550i, 2006 BMW 530i, and 2005 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For mounting dust caps on brake piston

Series: E39, E52, E53, E60, E61, E63, E64, E65, E66, E67

Storage location: A35

SI number: 1 01 97 (173)

Order number: 34 1 130

Installation sleeves

Fig 1: Identifying Installation Sleeves
G03296611Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

34 1 132 Press-in sleeve

Note: Diameter 58 mm for rear dust cap - Series: E52, E53, E60, E65, E66, E67

34 1 133 Sleeve

Note: For installing dust sleeve on floating caliper of front axle - Series: E53, E65, E60, E66, E67