67 13 005 Replacing Drive Unit For Electrically Operated Left Or Right Door Mirror (With Memory)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

E65, E66, E67 only: Remove housing on door mirror. Refer to 51 16 040 REMOVING AND INSTALLING/REPLACING HOUSING (COVER) ON LEFT OR RIGHT DOOR MIRROR .

Release screws (1).

Release drive unit for electrically operated door mirror (2) in direction of arrow and expose wiring harness underneath.

Fig 1: Locating Door Mirror Drive Unit Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect wiring harness (1) as illustrated and remove drive unit for electrically operated door mirror (2).

Installation:

Wiring is carried out with connectors.

Secure wiring harness (1) against flapping/rattling.

Fig 2: Disconnecting Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.