Convenience opening and closing

This convenience function is controlled by the CAS control unit via the door modules or the body basic module (KBM).

Convenience opening and can be triggered using the remote control or the driver's door lock cylinder. Convenience closing is activated when:

• the remote control button remains pressed and held after locking/securing,
• the mechanical key is kept in the "Lock" door lock position.

Convenience opening is similarly activated via the unlocking button on the remote control or using the mechanical key in the "Unlock" door lock position.

The sequence for convenience opening is as follows:

• both front power windows
• both rear power windows after a time delay
• sliding/tilt sunroof after a time delay

Convenience closing is performed in the following order:

• both rear power windows
• after a delay, both front power windows
• sliding/tilt sunroof after a time delay

The convenience function is stopped if the command is interrupted.