Mirror memory, driver
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2006 BMW Z4, 2006 BMW M3, 2006 BMW M Roadster, 2006 BMW M Coupe, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
The driver's mirror memory is an option and is part of the seat memory/steering column memory system.
The current positions of the door mirror on the driver's side and the front-passenger side are stored by:
- Memory buttons on the driver's seat control panel
- Remote control with Key Memory
Each time the vehicle is locked, the current mirror position is stored in the memory of the remote control that is currently being used. This means that the mirrors are always adjusted to the last position when the vehicle is unlocked (depending on the remote control used).
Pressing a memory button interrupts an adjustment activated by Key Memory.
Manual setting using the button pad in the driver's door switch block interrupts any adjustment initiated by a memory function.
The mirror memory function is independent of the terminal status.