64 53 517 Replacing desiccant insert for A/C system (condenser removed)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Remove cover cap (1) from condenser (2).

Fig 1: Removing Cover Cap From Condenser

G03288373

Courtesy of BMW OF NORTH AMERICA, INC.

Press sealing cap (1) inwards and remove Seeger circlip ring (2).

Fig 2: Pressing Sealing Cap Inwards Remove Seeger Circlip Ring

G03288374

Courtesy of BMW OF NORTH AMERICA, INC.

With assistance of a screwed-in screw (1), remove sealing cap (2) from condenser (3).

Fig 3: Removing Sealing Cap From Condenser

G03288375

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace sealing rings (1) of sealing cap (2) and coat with suitable refrigerant oil (cf. EPC).

Fig 4: Installing Sealing Rings Of Sealing Cap

G03288376

Courtesy of BMW OF NORTH AMERICA, INC.

Withdraw desiccant insert in direction of arrow from capacitor (2).

Fig 5: Inserting In Direction Of Arrow From Capacitor

G03288377

Courtesy of BMW OF NORTH AMERICA, INC.