LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 376 (Audio, Navigation, Anti-Theft And Restraints - Repair) >> Airbag Control Units, Airbag Sensors >> 65 77 730 Removing and installing (replacing) vehicle center sensor

65 77 730 Removing and installing (replacing) vehicle center sensor

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .
WARNING:

Note airbag SAFETY INSTRUCTIONS !

Incorrect handling can activate airbag and cause injury.

NOTE: Comply with notes and instructions on HANDLING OPTICAL FIBERS .

Necessary preliminary tasks: 

NOTE: Middle rear compartment ventilation duct shown removed for purposes of clarity.

Unfasten plug connection (1) and disconnect.

Tightening torque: 8 Nm

Remove vehicle center sensor (3).

Fig 1: Removing Vehicle Center Sensor
G03262541Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out PROGRAMMING/CODING .