LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 2409 (Maintenance And General Information - Repair) >> Maintenance And General Data >> 00 11... Checking/topping up oil level in rear differential

00 11... Checking/topping up oil level in rear differential

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, and 2008 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Risk of damage!
To avoid serious damage to the rear differential, it is essential to use only approved gear oils. See REAR AXLE - OPERATING FLUIDS .

Undo oil filler plug (1).

Check oil level.

If necessary, pour in rear differential oil up to lower edge of opening for oil filler plug (1).

Fig 1: Identifying Oil Filler Plug
G04739596Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

  1. Oil filler plug with sealing ring:
  2. Replace sealing ring (1).

    Tightening torque: 33 11 3AZ in 11-REAR DIFFERENTIAL CASE WITH COVER .

  3. Oil filler plug with O-ring:

Replace oil filler plug (2).

Tightening torque: 33 11 9AZ in 11-REAR DIFFERENTIAL CASE WITH COVER .

Fig 2: Identifying Oil Filler Plug With Sealing Ring
G04739597Courtesy of BMW OF NORTH AMERICA, INC.