Check tyre condition

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, and 2008 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Check tread depth of all tyres with tyre tread gauge
Check tyre tread surfaces and side walls for incisions and foreign particles such as nails or screws
Check tyre tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis alignment after consulting with customer and issue a separate invoice for this work

NOTE:

For details of approved wheel-tyre combinations, refer to KSD CD
For reasons of driving safety, only use tyres of the same type and tread pattern on a single vehicle
Inform customer of any incorrect or worn tyres