Service - rear brakes

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, and 2008 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Change brake pads. See 34 21 200 REMOVING AND INSTALLING OR REPLACING BRAKE LININGS ON BOTH REAR DISC BRAKES . Clean brake air ducts
Brake discs. See 34 21 320 REMOVING AND INSTALLING OR REPLACING BOTH REAR BRAKE DISCS
- Check surfaces and thickness.
- If necessary: Replace
Handbrake. See 34 41 220 REMOVING AND INSTALLING/REPLACING ALL HANDBRAKE SHOES
- Check condition, brake lining thickness and function
- If necessary: Replace
Reset CBS display

NOTE:

Clean brake air ducts.
Replace brake disks if they drop below minimum thickness (refer to Technical Data) and in event of scoring, heat cracks or thickness difference.
Apply a thin coat of grease to wheel centering on light alloy wheels, refer to Service Information Operating Fluids.
Issue a separate invoice for replacing the brake discs and handbrake shoes.