64 11 916 Replacing temperature sensor for cold-air distributor

WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove AUDIO SYSTEM CONTROLLER / CAR COMMUNICATION COMPUTER .

Release screws (1).

Fold back middle function carrier (2) in direction of arrow.

Installation note:

Make sure middle function carrier (2) is correctly seated.

Fig 1: Folding Back Middle Function Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Turn temperature sensor for cold-air distributor (1) through approx. 90° and pull out in direction of arrow.

Unfasten plug connection (2) and disconnect.

Installation note:

Make sure temperature sensor for cold-air distributor (1) is correctly seated.

Fig 2: Turning Temperature Sensor For Cold-Air Distributor

Courtesy of BMW OF NORTH AMERICA, INC.