52 24 037 Removing and installing/replacing seat frame
WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
Necessary preliminary tasks:
- Remove REAR SEAT
Removing seat frame:
- Feed cover welt (1) all round with special tool 00 9 317 out of retaining lugs (partly marked through recesses)
- Detach cover lugs in areas (2) from locking pins
- Carefully pull cover back to top side and pull Velcro-type fastener off frame
- Remove seat frame
Installation:
- Align and press on Velcro-type fastener
- Lay cable in opening of padding and through bore in frame
- Feed welt back in with special tool 00 9 317