52 17... Removing and installing/replacing left or right thigh support

WARNING: This page is about a different car, the 2010 BMW 535xi, 2009 BMW 535xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Loosen screws (1).

Disconnect plug connections (2).

Remove thigh support (3) towards top.

Fig 1: Identifying Plug Connections, Thigh Support And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, unclip trim (1) towards top and remove.

Installation:

Secure guide pins (2) in seat frame and clip trim (1) into place.

Fig 2: Identifying Trim And Guide Pins

Courtesy of BMW OF NORTH AMERICA, INC.