51 11 Front Bumper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATION (FRONT BUMPER)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Bumper to bracket | E32 | M6 | 9 Nm | |
| E36 | M8 | 22 Nm | ||
| E34 | M10 | 43 Nm | ||
| 2AZ Bumper and bracket to impact absorber | E31 | M10 | Install bolts with bolt cement. | 22 Nm |
| E38 / E39 / E46 | M10 | 41 Nm | ||
| E36 | M10 | Install bolts with bolt cement. | 55 Nm | |
| E32 / E34 / E30 / Mod. 88 | M12 | 48 Nm | ||
| E52 | 38 Nm | |||
| 3AZ Impact absorber/bracket to body | E30 / E24 | 23 Nm | ||
| E31 / E32 / E34 / E36 / E38 / E39 | M6 | 9 Nm | ||
| E32 / E34 | M10 | 48 Nm | ||
| E46 / E52 | M8 | 20 Nm | ||
| 4AZ Carrier to body | E46 / E65 / E66 / E67 | M8 | 18 Nm | |
| E60 / E61 / E63 / E64 | M8 | 21 Nm | ||
| 5AZ Carrier to deformation element | E85 / E86 | M10 | 38 Nm | |
| E85 / E86 | M6 | 8 Nm | ||
| E83 | M8 | 28 Nm | ||
| 6AZ Deformation element to body | E85 / E86 | M8 | 19 Nm | |
| E83 | M8 | 25 Nm | ||
| 7AZ License plate to bumper | E46 / E60 / E61 / E63 / E64 / E65 / E66 | 1 Nm | ||
| 8AZ License plate to bumper (thread repair) | E46 / E60 / E61 / E63 / E64 / E65 / E66 | M5 | 4.5 Nm | |
| 9AZ Bumper to front end | E60 / E61 | 5 Nm |