12 52 Plug connections, terminals, loose parts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS AND TERMINALS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52, N54 | M6 x 12 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52, N54, N53 | M6 | Replace screws | |
| Jointing torque | 3 Nm | |||
| Torque angle | 45° | |||
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52, N54, N52K, N51, N53 | M8 | Replace screws | |
| Jointing torque | 8 Nm | |||
| Torque angle | 45° | |||
| 4AZ Assembly: holder, monitor sensors | N54 | M6 x 12 | 8 Nm |