52 14 020 Removing and installing/replacing seat frame on left or right front seat (normal/electric)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front seat
Remove backrest frame
Remove both seat rails on front seat
Remove seat cover for front seat

Release fastening elements (1) on left and right.

Remove component (2) on left and right.

Remove complete seat wiring harness.

If necessary, remove drive for active seat.

Fig 1: Identifying Fastening Elements On Left And Right

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When replacing backrest or seat frame, break off centering hooks (1) from seat frame.

Fig 2: Identifying Centering Hooks From Seat Frame

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The new seat frame part contains all the drives.