51 34 160 Removing and installing/replacing housing cover on inner left or right door window frame

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Open door window.
Remove rear door trim panel

Security version:

Cover is designed as armor plating and bonded to door window frame, replacement is not possible.

Version with roller sun blind on rear door:

If necessary, unclip cover (1) and release screw (2) underneath.

Remove hook (3) on cover (4).

Fig 1: Remove Hook (3) On Cover (4)

G05477827

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

If necessary, release screw (1) on hook (2).

Remove hook (2) in direction of arrow from cover (4).

Fig 2: Removing Hook From Cover

G04728462

Courtesy of BMW OF NORTH AMERICA, INC.

Version without roller sun blind:

If necessary, lever out cover (1) in direction of arrow.

NOTE: Do not tear off cover (1) in area (2).

Fig 3: Removing Cover

G05477829

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of cover (1) must not be damaged:

2 All-round guide
3 Connection point

Fig 4: Identifying All-Round Guide And Connection Point
Courtesy of BMW OF NORTH AMERICA, INC.