51 17 400 Removing and installing/replacing bump stop with injector for filler flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Release cover (1).

Press catches (2) together and pull out injector (3).

Installation:

Install injector (3) with fitted cover (1).

Fig 1: Installing Injector With Fitted Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on injector (2) must not be damaged.

Make sure cover (3) is correctly seated on injector (2).

Fig 2: Identifying Catches On Injector

Courtesy of BMW OF NORTH AMERICA, INC.