31 3 030 Press-in and press-out tool

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For rubber bearings on trailing arm

Series: E60, E61, E63, E64, E65, E66, E67, E70, E81, E83, E87, E90, E91, E92, E93

Storage location: B46

SI number: 1 14 01 (766)

Order number: 31 3 030

Press-in and press-out tool

Consisting of:

1 = 31 3 031 Thrust piece

2 = 31 3 032 Bushing

Fig 1: Identifying Press-In And Press-Out Tool (31 3 030)

Courtesy of BMW OF NORTH AMERICA, INC.