54 34 Motor-driven Convertible Top (Hydraulic Components)
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
MOTOR-DRIVEN CONVERTIBLE TOP (HYDRAULIC COMPONENTS) REFERENCE CHART
| Type | Thread | Work instruction | Measure | |
|---|---|---|---|---|
| 1 AZ Hydraulic lines to electrohydraulic convertible top | E30 | 8.6 Nm | ||
| 2AZ Valves to hydraulic control unit | E30 | 2 Nm | ||
| 3AZ Hydraulic unit to body or carrier | E46/Z3 and M Roadster | 10 Nm | ||
| E52 | 11 Nm | |||
| 4AZ Lines to hydraulic unit | Z3 and M Roadster | 16 Nm | ||
| E52/E85 | 12 Nm | |||
| 5AZ Oil filler plug to hydraulic unit | E46/Z3 and M Roadster/E52 | 11 Nm | ||
| E85 | 1 Nm | |||
| 6AZ Lines to cylinder | E85 | 2.5 Nm | ||
| 7AZ Emergency release to hydraulic unit | E85 | 0.4 Nm | ||
| 8AZ Emergency release to convertible top | E85 | Nm | ||
| 9AZ Rear window module to main bearing | E64 | 10 ± 1.5 Nm | ||
| 10AZ Tray, rear window module | E64 | Oval-head screw | 2.5 ± 0.5 Nm | |
| 11 AZ Rear window to power window unit | E64 | 5 ± 0.75 Nm | ||
| 12AZ Lockplate to hydraulic cylinders | E64 | 2.9 ± 0.7 Nm | ||
| 13AZ Tension cable mounting | E64 | 2.5 Nm |