13 11 Carburetor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760Li, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
FUEL PUMP WITH DRIVE AND PIPES TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Carburetor to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 2AZ Carburetor to insulating flange | M10 / M20 / M30 | 10 Nm | ||
| 3AZ Insulating flange to intake manifold | M10 / M20 / M30 | 10 Nm | ||
| 4AZ Idling shut off valve; max. | M10 / M20 / M30 | 5 Nm | ||
| 5AZ Flow valve; max. | M10 / M20 / M30 | 28 Nm | ||
| 6AZ Throttle valve assembly to float housing; max. | M10 / M20 / M30 | 9 Nm | ||
| 8AZ Throttle valve control to carburetor; max. | 2BE | 3 Nm | ||
| 9AZ Warm-up regulator to engine | M10 / M20 / M30 | 23 Nm |