34 11 Front Brake E63
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
TECHNICAL DATA - FRONT BRAKE E63
| In case of M vehicle and perforated brake discs new brake pads may only be installed if the brake disc thickness is greater than the minimum brake disc thickness (MIN TH). Minimum brake disc thickness during general inspection (GI): M vehicles and perforated brake discs: Nominal size thickness minus 1.6 mm. | ||
| Different thicknesses on brake linings | max. mm | 0.01 |
| Brake disc diameter Models: 525iN52 530iM54 530d 630i 525ix 530ix |
mm | 324 |
| Brake disc diameter Models: 530iN52 545i 535d 645Ci 540i 550i |
mm | 348 |
| Brake disc diameter (M Series) | mm | 374 |
| Brake disc Thickness (M Series) | mm | 36 |
| Wear warning from residual lining thickness | mm | 3.0 |
| Wear warning from residual lining thickness M Series |
mm | 3.7 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models:545i 645Ci 630i 540i |
mm | 28.4 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body M Series |
mm | 34.4 |
| Max. machining limit per friction ring side (M models must not be machined!) | mm | 0.8 |