LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1408 (Restraint Systems - Tightening Torques) >> 11 Seat Belts >> 72 11 Seat Belts

72 11 Seat Belts

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
SEAT BELTS - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
Seat belt, front:        
1AZ Automatic reel        
- to B-pillar, bottom E60 / E61 / E63     36 Nm
- to backrest E64     36 Nm
2AZ Belt deflection fitting        
- to B-pillar, top E60 / E61 / E63     36 Nm
- to head restraint bar E64     8 Nm
3AZ Corner hoop (to B-pillar, middle) E60 / E61 / E63     3 ± 0.5 Nm
4AZ Slide bar for belt - to body E63     44 Nm
5AZ Anchor fitting, belt        
- to front seat E60 / E61     31 Nm
  E64     45 Nm
6AZ Belt buckle tensioner - to front seat E60 / E61     36 Nm
  E63 / E64     45 Nm
7AZ Coupling gearing to centering pin (to seat frame) E64     3 Nm
8AZ Anchor fitting tensioner E60 / E61     36 Nm
Seat belt, rear:        
20AZ Automatic reel - normal        
- outer to body E60 / E63 / E64     36 Nm
- middle to body E60     36 Nm
21AZ Automatic reel - through-loading        
- middle to backrest E61     36 Nm
- outer to body E60 / E61     36 Nm
22AZ Anchor fitting, belt - to floor pan E60 / E61 / E63 / E64     36 Nm
23AZ Seat belt buckle (lower strap)        
- without buckle retractor E60 / E61 / E63 / E64     36 Nm
- with buckle retractor E60 / E61     36 Nm
24AZ Belt deflection fitting - to partition E63 / E64     36 Nm