64 12 Additional Heater with Controls
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
ADDITIONAL HEATER WITH CONTROLS - TIGHTENING TORQUES SPECIFICATION
| Type | thread | tightening specification | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Additional heater to body floor | All | 4.5 Nm | ||
| 2AZ | Glow plug | E24 | 17.5 Nm | ||
| E31 / E32 / E34 | 4 Nm | ||||
| 3AZ | Temperature sensor | E31 / E32 / E34 | 0.5 Nm | ||
| 4AZ | Oil control plug and oil filler plug | All | 16 Nm | ||
| 5AZ | Mounting screws | All | M5 | 6 Nm | |
| All | M6 | 10 Nm | |||
| All | M8 | 24 Nm | |||
| All | M10 | 48 Nm | |||
| 6AZ | Screws for filter cover | All | 0.9 Nm | ||
| 7AZ | Central cover on heater | All | 1.5 Nm | ||
| 8AZ | Combustion air fan unit on heater | All | 1.5 Nm | ||
| 9AZ | Recirculating pump on heater | All | 1.5 Nm | ||
| 10AZ | Control unit/transfers heat to heater Install screws with Loctite 243 | All | 4.5 Nm | ||