LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 48i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1399 (Brakes - Tightening Torques) >> 11 Front Brakes >> 34 11 Front Brake

34 11 Front Brake

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BRAKE - TIGHTENING TORQUES SPECIFICATION

  Type Thread Tightening specification Measure
1AZ Brake disk to wheel hub (contact faces between brake disk and wheel hub cleaned and grease-free) E39 / E38 / E46 / E52 / E53 / E85 / E86 / E83 / E65 / E66 / E67 / E60 / E61 / E63 / E64     16 Nm
2AZ Brake caliper to steering knuckle (screws lightly oiled, contact surfaces between brake caliper and steering knuckle cleaned and grease-free) E34 / E36 / E32 / E31 / E38 / E39 / E46 / E52 / E53 / E65, E30 / 325iX, E66 / E67 / E83 / E85 / E86 / E60 / E61 / E63 / E64     110 Nm
2AZ with aluminum brake caliper E31     115 Nm
  E12 / E21 / E23 / E24 to 5.82     95 Nm
  E28 / E30 / E24 / from 5.82     123 Nm
3AZ Guide bolt E39 / E38 / E46 / E52 / E53 / E85 / E86 / E83 / E65 / E66 / E67 / E60 / E61 / E63 / E64 wrench size 7 mm   30 - 5 Nm
4AZ Bolts to guide pin (always replace) E30     35 Nm
5AZ Protective plate to steering knuckle E85 / E86 / E83 M6   9 Nm
  E67 / E60 / E61 / E63 / E64 / E65 / E66 M6   12 Nm