33 21 Output Shaft
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT SHAFT - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft to rear axle differential and drive flange | ||||
| Hexagon socket screw | E30, E32, E34 | M10x50 10.9 | Replace screws | 60 Nm | |
| Torx screw without ribbed teeth | E30, E31, E32, E34, E36, E38 | M10x50 10.9 (black) | Replace screws | 60 Nm | |
| Torx screw with ribbed teeth | E36, E39, E46 | M8x40 (black) | Replace screws | 64 Nm | |
| E36, E39, E46, E60, E83, E85 | M8x40 (silver) | Replace screws | 52 Nm | ||
| E36 / M54 / Z3 3.0i, E46 | M10x23 10.9 (silver) | Replace screws | 85 Nm | ||
| E30, E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E83, E85, E86 | M10 (silver) | Replace screws | 80 Nm | ||
| E36 / Z3 2.8i, E36 / S50 / S52 / S54, E46 / S54, E85 / S54, E86 / S54 | M10x46 10.9 (black) | Replace screws | 100 Nm | ||
| E31, E38, E39, E60, E63, E64 | M12x50 10.9 (black) | Replace screws | 135 Nm | ||