33 17 Final Drive Unit Mountings
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
FINAL DRIVE UNIT MOUNTINGS - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Final drive to rear axle carrier | E21 | 90 Nm | ||
| E12, E24 / until 5.82 | 80 Nm | ||||
| E23, E24 / from 5.82, E28 / from 5.82, E30, E32, E34, E36 / Z3 / Compact | 110 Nm | ||||
| E36, E46 | Front | 95 Nm | |||
| E46 / S54, E85 / S54, E86 / S54 | Front | Observe repair instruction. | 200 Nm | ||
| E38, E39, E52 | Front | 150 Nm | |||
| E53, E60, E61, E63, E64, E65, E66, E67, E83, E85 / except S54, E86 / except S54 | Front | Observe repair instruction. | 100 Nm | ||
| E31, E36 | Rear | 77 Nm | |||
| E38 | Rear | 102 Nm | |||
| E38 | Rear | tighten also via screw head | 75 Nm | ||
| E39 | Rear | tighten also via screw head | 105 Nm | ||
| E46 / except S54 | Rear | 174 Nm | |||
| E46 / S54, E85 / S54, E86 / S54 | Rear | Observe repair instruction. | |||
| Jointing torque | 20 Nm | ||||
| Torque angle | 90 ° | ||||
| E52 | Rear | tighten also via screw head | 102 Nm | ||
| E53, E60 / except S85, E61, E63 / except S85, E64, E65, E66, E67, E83, E85 / except S54, E86 / except S54 | Rear | Observe repair instruction. | 165 Nm | ||
| E60 / S85, E63 / S85 | Rear | Observe repair instruction. | 220 Nm | ||
| 2AZ | Final drive to stabilizer link and stabilizer link to body | E21, E30 | 90 Nm | ||
| 3AZ | Final drive to rubber mount | E12, E23, E24, E28 | 87 Nm | ||
| E32, E34 | 77 Nm | ||||
| 4AZ | Differential cover with rubber mount to body | E30, E36 / Z3 / Compact | 77 Nm | ||
| 5AZ | Final drive cover to case cover | E32 | M12 8.8 | 81 Nm | |
| E32, E34 | M12 10.9 | 102 Nm | |||
| 6AZ | Rubber mount to body | E12, E24 | 48 Nm | ||
| E23 | M8 8.8 | Thread free from oil and grease Secure with Loctite No. 270 |
24 Nm | ||
| E23 | M8 10.9 | Thread free from oil and grease Secure with Loctite No. 270 |
37 Nm | ||
| E23, E32 | M10 8.8 | Thread free from oil and grease Secure with Loctite No. 270 |
52 Nm | ||
| 7AZ | Final drive cover to final drive | E31 | M14 x 1.5 | 186 Nm | |
| 8AZ | Final drive cover to rear axle support | E31 | 127 Nm | ||
| 9AZ | Vibration damper | E65 / M57TU / M57T2 | M12 | 100 Nm | |