32 00 Steering
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
STEERING - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Steering gear to front axle carrier | E21 | 50 Nm | ||
| E21 (power steering) | 41 Nm | ||||
| E12, E23, E24 | 42 Nm | ||||
| E24 / from 5.82, E28, E31, E32, E34 | M12 | 80 Nm | |||
| E28, E30, E36, E46 | M10 | 42 Nm | |||
| E32/3 / 750iLs | M10 10.9 | 110 Nm | |||
| E38 | M10 8.8 | Press steering gear outwards to stop on front axle support and first tighten both front screws. | 42 Nm | ||
| E38 / Ball-and-nut steering, E39 / Ball-and-nut steering | M10 10.9 | 62 Nm | |||
| E39 / Rack-and-pinion steering gear, E52 | M10 | Replace screws | 42 Nm | ||
| E53 | M12 10.9 | ||||
| Jointing torque | 50 Nm | ||||
| Torque angle | 90 ° | ||||
| E60 / REAR END, E61 / REAR END, E63, E64, E65, E66, E67 | Replace screws & nuts | ||||
| Jointing torque | 56 Nm | ||||
| Torque angle | 90 ° | ||||
| E61 / Four Wheel Drive, E60 / Four Wheel Drive | M12 | Replace screws & nuts | 120 Nm | ||
| E83 | M12 | Replace screws & nuts | 100 Nm | ||
| E85, E86 | M10 | Replace screws & nuts | 42 Nm | ||