34 1 130 Installation Sleeves

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

NOTE: For mounting dust caps on brake piston

Series: E39, E52, E53, E60, E61, E63, E64, E65, E66, E67

Storage location: A35

SI number: 1 01 97 (173)

Order number: 34 1 130 Installation sleeves

Consisting of:

34 1 132 Press-in sleeve

NOTE: Diameter 58 mm for rear dust cap - Series: E52, E53, E60, E65, E66, E67

34 1 133 Sleeve

NOTE: For installing dust sleeve on floating caliper of front axle - Series: E53, E65, E60, E66, E67

Fig 1: Identifying Special Tool - Installation Sleeves

Courtesy of BMW OF NORTH AMERICA, INC.